Timing Cover: Specifications

Front Timing Chain Case






Tighten bolts to the specified torque in numerical order as shown.

After all bolts are tightened, retighten them to the specified torque in numerical order as shown.

There are two type of bolts.

Bolt position Bolt diameter
1 - 5 : 10 mm (0.39 in)
6 - 25 : 6 mm (0.24 in)

Bolt position Tightening specification
1 - 5 : 55.0 Nm (5.6 kg-m, 41 ft-lb)
6 - 25 : 12.7 Nm (1.3 kg-m, 9 ft-lb)



Rear Timing Chain Case






Tighten bolts in numerical order as shown.

There are two type of bolts with different torque specifications.






After all bolts are tightened, retighten them to the specified torque in numerical order as shown.