Fog/Driving Lamp: Service and Repair

FRONT FOG LAMP

Removal and Installation


FOG LAMP

Removal
Note:
The fog lamp is a semi-sealed beam type which uses a replaceable halogen bulb.
1.Position front fender protector aside. Removal And Installation
2.Disconnect fog lamp connector.





3.Remove fog lamp screws and pull fog lamp rearward out of front bumper.

CAUTION:
- Do not leave fog lamp assembly without bulb for a long period of time. Dust, moisture, smoke, etc. entering the fog lamp body may affect the performance. Remove the bulb from the headlamp assembly just before replacement bulb is installed.
- Grasp only the plastic base when handling the bulb.
Never touch the glass envelope. Touching the glass could significantly affect the bulb life and/or fog lamp performance.
Installation
Installation is in the reverse order of removal.
NOTE:
After installation, perform front fog lamp aiming adjustment. Adjustments.