Removal and Replacement

HEADLAMP

Removal and Installation


FRONT COMBINATION LAMP

Removal
1.Position front fender protector aside. Removal And Installation.
2.For steel bumper, remove the front bumper upper valance. Service and Repair.
3.For plastic bumper, remove the front bumper assembly. Service and Repair.
4.Remove the front combination lamp bolts.
5.Disconnect the front combination lamp connector and remove front combination lamp.
Installation
Installation is in the reverse order of removal.
NOTE:
After installation, perform headlamp aiming adjustment. Adjustments.
: 6.0 Nm (0.61 kg-m, 53 in-lb)