Removal And Installation

SPARK PLUG

Removal and Installation


REMOVAL

1.Remove ignition coil. Removal And Installation.





2.Remove spark plug using suitable tool.

CAUTION:
Do not drop or shock it.

INSPECTION AFTER REMOVAL







- Do not use a wire brush for cleaning.
- If the spark plug tip is covered with carbon, spark plug cleaner may be used.

Cleaner air pressure : Less than 588 kPa (6 kg/cm2, 85 psi)
Cleaning time : Less than 20 seconds






- Checking and adjusting spark plug gap is not required between change intervals.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
Do not drop or shock the spark plug.