Removal And Installation

SHIFT CONTROL SYSTEM

Removal and Installation


REMOVAL

1.Remove instrument lower panel RH and glove box. Removal And Installation.
2.Remove the center console. Exploded View.
3.Disconnect the following from the shift selector assembly.
- Shift selector control cable
- Key interlock cable
- Shift selector harness connector
4.Remove the shift selector assembly.
5.Remove the shift selector handle, if necessary.
6.Remove the position indicator, if necessary.

INSTALLATION

Installation is in the reverse order of removal.
- Install and adjust the shift selector control cable. Adjustments.
- Install and adjust the key interlock cable. Removal And Installation.