FS5R30A

REAR OIL SEAL

Removal and Installation


REMOVAL






1.Remove the rear propeller shaft. Removal And Installation.
2.Remove the rear oil seal using Tool.
Tool number: ST-33290001 (J-34286)

CAUTION:
Do not reuse rear oil seal.

INSTALLATION






Installation is the reverse order of removal.
- Drive the new oil seal straight until it stops using Tool.
Tool number: ST-30720000 (J-25405)

CAUTION:
- Do not reuse rear oil seal.
- Apply multi-purpose grease to oil seal lips before installing.
- Do not incline rear oil seal during installation.
- Check the transmission oil level after installation. Checking.