P Position Interlock Door Lock/Unlock Function Does Not Operate

P POSITION INTERLOCK DOOR LOCK/UNLOCK FUNCTION DOES NOT OPERATE

Diagnosis Procedure


1. CHECK "AUTOMATIC LOCK/UNLOCK SELECT" SETTING IN "WORK SUPPORT"

1.Select "DOOR LOCK" of "BCM" using CONSULT.
2.Select "AUTOMATIC LOCK/UNLOCK SELECT" in "WORK SUPPORT" mode.
3.Check "AUTOMATIC LOCK/UNLOCK SELECT" in "WORK SUPPORT".
Refer to "DOOR LOCK : CONSULT Function (BCM DOOR LOCK)" CONSULT Function.
Is the inspection result normal?
YES- GO TO 2.
NO- Set "AUTOMATIC LOCK/UNLOCK SELECT" in "WORK SUPPORT".

2. CHECK "AUTOMATIC DOOR LOCK SELECT" SETTING IN "WORK SUPPORT"

1.Select "DOOR LOCK" of "BCM" using CONSULT.
2.Select "AUTOMATIC DOOR LOCK SELECT" in "WORK SUPPORT" mode.
3.Check "AUTOMATIC DOOR LOCK SELECT" in "WORK SUPPORT".
Refer to "DOOR LOCK : CONSULT Function (BCM DOOR LOCK)" CONSULT Function.
Is the inspection result normal?
YES- GO TO 3.
NO- Set "AUTOMATIC DOOR LOCK SELECT" in "WORK SUPPORT".

3. CHECK "AUTOMATIC DOOR UNLOCK SELECT" SETTING IN "WORK SUPPORT"

1.Select "DOOR LOCK" of "BCM" using CONSULT.
2.Select "AUTOMATIC DOOR UNLOCK SELECT" in "WORK SUPPORT" mode.
3.Check "AUTOMATIC DOOR UNLOCK SELECT" in "WORK SUPPORT".
Refer to "DOOR LOCK : CONSULT Function (BCM DOOR LOCK)" CONSULT Function.
Is the inspection result normal?
YES- GO TO 4.
NO- Set "AUTOMATIC DOOR UNLOCK SELECT" in "WORK SUPPORT".

4. REPLACE BCM

1.Replace BCM. Refer to "Removal and Installation" Service and Repair.
2.Confirm the operation after replacement.
Is the result normal?
YES- INSPECTION END
NO- Check intermittent incident. Refer to "Intermittent Incident" Intermittent Incident.