Inspection

ELECTRIC SHIFT SELECTOR

Inspection


INSPECTION AFTER INSTALLATION

- Pull the selector lever knob upward to check that it does not come off.
- Shift the selector lever and check that the indication of the selector indicator (in the finisher area) and the shift position indicator (in the combination meter) correspond to the actual shift position.
- Check that a buzzer sounds and shifting is not possible when an attempt is made to shift the selector lever from the P position to another position with the pwer switch ON and the brake pedal not depressed.
NOTE:
If the brake pedal is depressed, the gear shifts to the N position irrespective of the position to which the lever is shifted.
- Check that a buzzer sounds and that shifting is not possible when an attempt is made to shift the selector lever from the P position to another position in the READY status, and with the brake pedal not depressed.
NOTE:
Shifting is possible if the brake pedal is depressed.