Operation

OPERATION

Description

- This A/C uses various sensors to detect temperature changes in the interior caused by factors such as changes in ambient temperature and sunload. When the desired temperature is set, the discharge air temperature, discharge air flow, and inlet/outlet changes are controlled automatically to maintain a constant interior temperature at all times.
- The air flow volume and switching of air inlets and air outlets can be selected manually without auto function.
While using auto function, it is still possible to select a particular item manually.
- It is possible to use A/C-Heater Timer (Climate Ctrl. Timer) or remote climate control to adjust the interior to a comfortable temperature before entering the vehicle.

TABLE OF OPERATION CONDITIONS OF A/C SYSTEM FUNCTION OPERATED BY POWER


SWITCH OPERATION

Each of the A/C system functions is operative under the following conditions.
�:Operate -: Does not operate





NOTE:
- Connecting EVSE when the vehicle is in READY state cancels READY state (ready indicator lamp turns
OFF), and power supply position changes to ON. At this time, cooling/heating function of A/C system stops, and only ventilation function operates. When using cooling/heating function, turn power switch OFF, check that charging is started, and then turn power switch ON again.
- If cooling/heating function is used during charging, and when charging is completed, cooling/heating function stops, and only ventilation function operates.