Computers/Controls - CONSULT III Plus(R) Saved Data List

Classification: EC12-021

Reference: NTB12-074

Date: September 12, 2012

SAVED DATA LIST REPROGRAMMING WITH CONSULT III PLUS

SERVICE INFORMATION





^ When performing a "Reprogramming" operation with C-III plus, the screen in Figure 1 may display.

^ This screen displays "Saved Data" from previous C-III plus operations.

^ During the initial "Reprogramming Confirmation" set-up, if you get this screen:

1. Select Delete, then

2. Select Other Operation, then

3. Continue with the reprogramming procedure.

NOTE:
If reprogramming does not complete, this screen can display for reprogramming recovery. Do not select Delete if this screen displays during reprogram recovery.