Insulated Protective Wear And Insulating Tools

CAUTIONS AS TO HIGH VOLTAGE

Insulated Protective Wear and Insulating Tools


PROTECTIVE WEAR CONTROL

- Perform an inspection before beginning work, and do not use any items where abnormalities are found.

DAILY INSPECTION

This inspection is performed before and after use, the worker in responsible who will directly use the items inspects them and checks for deterioration and damage.
- Insulated gloves
Inspect the insulated gloves for scratches, holes, and tears. (Visual check and air leakage test)










- Insulated safety shoes
Inspect the insulated safety boots for holes, damage, nails, metal pieces, wear or other problems on the soles. (Visual check)
- Insulated rubber sheet
Inspect the insulated rubber sheet for tears. (Visual inspection)

INSULATING TOOLS

When performing work at locations where high voltage is applied (such as terminals), use insulated tools.

HANDLING OF INSULATION RESISTANCE TESTER


CAUTION:
Unlike the ordinary tester, the insulation resistance tester applies 500V when measuring. If used incorrectly, there is the danger of electric shock. If used in the vehicle 12V system, there is the danger of damage to electronic devices. Read the insulation resistance tester instruction manual carefully and be sure to work safely.