Operation CHARM: Car repair manuals for everyone.
Home >> Nissan-Datsun >> 2012 >> Leaf ELE-Electric Engine >> Repair and Diagnosis >> Windows and Glass >> Windows >> Testing and Inspection >> Component Tests and General Diagnostics >> Encoder Circuit
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Encoder Circuit




ENCODER CIRCUIT

Diagnosis Procedure


1. CHECK ENCODER PULSE SIGNAL

1.Turn power switch ON.
2.Check signal between power window main switch harness connector and ground with oscilloscope.










Is the inspection result normal?
YES- GO TO 7.
NO- GO TO 2.

2. CHECK ENCODER SIGNAL CIRCUIT

1.Turn power switch OFF.
2.Disconnect power window main switch connector and front power window motor (driver side) connector.
3.Check continuity between power window main switch harness connector and front power window motor (driver side) harness connector.





4.Check continuity between power window main switch harness connector and ground.





Is the inspection result normal?
YES- GO TO 3.
NO- Repair or replace harness.

3. CHECK ENCODER POWER SUPPLY

1.Connect power window main switch connector.
2.Turn power switch ON.
3.Check voltage between front power window motor (driver side) harness connector and ground.





Is the inspection result normal?
YES- GO TO 5.
NO- GO TO 4.

4. CHECK ENCODER POWER SUPPLY CIRCUIT

1.Turn power switch OFF.
2.Disconnect power window main switch connector.
3.Check continuity between power window main switch harness connector and front power window motor (driver side) harness connector.





4.Check continuity between power window main switch harness connector and ground.





Is the inspection result normal?
YES- Replace power window main switch.
NO- Repair or replace harness.

5. CHECK ENCODER GROUND CIRCUIT

1.Turn power switch OFF.
2.Check continuity between front power window motor (driver side) harness connector and ground.





Is the inspection result normal?
YES- GO TO 7.
NO- GO TO 6.

6. CHECK ENCODER GROUND CIRCUIT

1.Disconnect power window main switch connector.
2.Check continuity between power window main switch harness connector and front power window motor (driver side) harness connector.





3.Check continuity between power window main switch harness connector and ground.





Is the inspection result normal?
YES- Replace front power window motor (driver side).
NO- Repair or replace harness.

7. CHECK INTERMITTENT INCIDENT

Refer to "Intermittent Incident" Intermittent Incident.
- INSPECTION END
pro multis · About Operation CHARM