Removal And Installation

ACCELERATOR CONTROL SYSTEM

Removal and Installation


REMOVAL

1.Disconnect accelerator pedal position sensor harness connector.
2.Remove accelerator pedal assembly mounting nuts.
3.Loosen brake pedal assembly mounting nuts. Exploded View.
NOTE:
Brake pedal assembly does not have to be removed from the vehicle.
4.Remove accelerator pedal assembly.

CAUTION:
- Never disassemble accelerator lever. Never remove accelerator pedal position sensor from accelerator lever.
- Avoid impact from dropping etc. during handling.
- Be careful to keep accelerator lever away from water.

INSTALLATION

Note the following, and install in the reverse order of removal.
- Insert locating pin into vehicle side to position accelerator pedal assembly. Tighten mounting nuts to accelerator pedal assembly.