Changing

CVT FLUID

Changing

1.Remove drain plug from oil pan and then the CVT fluid.
2.Remove drain plug gasket from drain plug.
3.Install drain plug gasket to drain plug

CAUTION:
Never reuse drain plug gasket.
4.Install drain plug to oil pan. Exploded View.
5.Fill CVT fluid from CVT fluid charging pipe to the specified level.
CVT fluid: General Specification.
Fluid capacity: General Specification.

CAUTION:
- Use only Genuine NISSAN CVT Fluid NS-2. Never mix with other fluid.
- Using CVT fluid other than Genuine NISSAN CVT Fluid NS-2 will deteriorate in driveability and
CVT durability, and may damage the CVT, which is not covered by the warranty.
- When filling CVT fluid, take care not to scatter heat generating parts such as exhaust.
- Sufficiently shake the container of CVT fluid before using.
- Delete CVT fluid deterioration date with CONSULT after changing CVT fluid. CONSULT Function (Transmission).
6.With the engine warmed up, drive the vehicle in an urban area.
NOTE:
When ambient temperature is 20�C (68�F), it takes about 10 minutes for the CVT fluid to warm up to 50 to
80�C (122 to 176�F).
7.Check CVT fluid level and condition.
8.Repeat steps 1 to 5 if CVT fluid has been contaminated.