P1715

P1715 INPUT SPEED SENSOR

Description

ECM receives input speed sensor signal from TCM through CAN communication line. ECM uses this signal for engine control.


On Board Diagnosis Logic

NOTE:
-If DTC P1715 is displayed with DTC UXXXX first perform the trouble diagnosis for DTC UXXXX.
-If DTC P1715 is displayed with DTC P0607, first perform the trouble diagnosis for DTC P0607.
-If DTC P1715 is displayed with DTC P0335, first perform the trouble diagnosis for DTC P0335.
-If DTC P1715 is displayed with DTC P0340, P0345 first perform the trouble diagnosis for DTC P0340, P0345.
-If DTC P1715 is displayed with DTC P0605, first perform the trouble diagnosis for DTC P0605.
The MIL will not illuminates for this diagnosis.







Diagnosis Procedure


1. CHECK DTC WITH TCM

Check DTC with TCM. On Board Diagnostic (OBD) System.
OK or NG
OK- GO TO 2.
NG- Perform trouble shooting relevant to DTC indicated.

2. REPLACE TCM

Replace TCM. Service and Repair.
-INSPECTION END