Hazard Function

HAZARD FUNCTION

Description

Perform answer-back for each operation with number of blinks.


Component Function Check


1. CHECK FUNCTION

Check hazard warning lamp ("FLASHER") in Active Test.
Is the inspection result normal?
YES- Hazard warning lamp circuit is OK.
NO- Refer to "Wiring Diagram" [1][2]Electrical Diagrams.


Diagnosis Procedure


1. CHECK HAZARD SWITCH CIRCUIT

Operate the hazard lights by turning ON the hazard warning switch.
Is the inspection result normal?
YES- GO TO 2
NO- Repair or replace hazard warning switch circuit. Refer to "Work Flow" Exterior Lighting.

2. CHECK INTERMITTENT INCIDENT

Refer to "Intermittent Incident" Intermittent Incident.
- Inspection End.