Operation CHARM: Car repair manuals for everyone.

Diagnosis Procedure




DOOR LOCK ACTUATOR

REAR RH : Diagnosis Procedure

Regarding Wiring Diagram information, refer to "Wiring Diagram" [1][2]Electrical Diagrams.

1. CHECK DOOR LOCK ACTUATOR SIGNAL

Check voltage between BCM connector and ground.





Is the inspection result normal?
YES- GO TO 3
NO- GO TO 2

2. CHECK DOOR LOCK ACTUATOR CIRCUIT

1.Disconnect BCM and rear door lock actuator RH connectors.
2.Check continuity between BCM connector and rear door lock actuator RH connectors.





3.Check continuity between BCM connector and ground.





Is the inspection result normal?
YES- Replace rear door lock actuator RH.
NO- Repair or replace harness.

3. CHECK INTERMITTENT INCIDENT

Refer to "Intermittent Incident" Intermittent Incident.
- Inspection End.