Warning Chime Function
WARNING CHIME FUNCTION
Description
Performs operation method guide and warning with buzzer.
Component Function Check
1. CHECK FUNCTION
With CONSULT
1.Check the operation with "INSIDE BUZZER" in the Active Test.
2.Touch "TAKE OUT", "KNOB"or "KEY"on screen.
Is the inspection result normal?
YES- Warning buzzer into combination meter is OK.
NO- Refer to "Diagnosis Procedure" .
Diagnosis Procedure
1. CHECK METER BUZZER CIRCUIT
Operate the hazard lights by turning ON the hazard warning switch.
Is the inspection result normal?
YES- GO TO 2
NO- Replace combination meter. Refer to "Removal and Installation" Service and Repair.
2. CHECK INTERMITTENT INCIDENT
Refer to "Intermittent Incident" Intermittent Incident.
- Inspection End.