Turn Signal And Hazard Warning Lamps

TURN SIGNAL AND HAZARD WARNING LAMPS

Removal and Installation


REMOVAL

1.Remove the front fender protector side cover.
2.Position the fender protector aside. Refer to "FENDER PROTECTOR : Removal and Installation" Removal And Installation.
3.Disconnect the harness connector from the turn signal and hazard warning lamp.
4.Remove front fog lamp finisher. Refer to "Removal and Installation" Removal And Installation.





5.Remove the screw (A) from the turn signal and hazard warning lamp (1) and remove.

INSTALLATION

Installation is in the reverse order of removal.