Procedures

WHEEL HUB

On-vehicle Service

Check axle and suspension parts for excessive play, wear or damage.





- Shake each rear wheel to check for excessive play.

Wheel Hub Bearing

If the following conditions are not met or not within specification, replace the wheel hub and bearing.
- Check that wheel hub and bearing rotates smoothly.
- Check wheel hub and bearing axial end play.
Axial end play: Refer to "Wheel Hub Bearing" Specifications.





- Check wheel hub and bearing runout.
Runout: Refer to "Wheel Hub Bearing" Specifications.
NOTE:
- Make sure the area between the disc brake rotor and wheel hub and bearing are free from dirt or debris.
- Place the dial gauge on smooth surface, free from scratches or dents.
- Make sure the disc brake rotor is securely fastened to the wheel hub and bearing.