LH & RH Front Anti-Pinch

POWER WINDOW MOTOR

PASSENGER SIDE : Diagnosis Procedure

Regarding Wiring Diagram information, refer to {LINK_TO:0000000007987861}, "Wiring Diagram - With Left And Right Front Power
Window Anti-Pinch".

Front Power Window Motor RH Circuit Check


1. CHECK FRONT POWER WINDOW SWITCH RH OUTPUT SIGNAL

1.Turn ignition switch OFF.
2.Disconnect front power window motor RH.
3.Turn ignition switch ON.
4.Check voltage between front power window motor RH connector D104 and ground.





Is the inspection result normal?
YES- GO TO 3.
NO- GO TO 2.

2. CHECK HARNESS CONTINUITY

1.Turn ignition switch OFF.
2.Disconnect power window and door lock/unlock switch RH.
3.Check continuity between power window and door lock/unlock switch RH connector D105 and front power window motor RH connector D104.





4.Check continuity between power window and door lock/unlock switch RH connector D105 and ground.





Is the inspection result normal?
YES- Replace power window and door lock/unlock switch RH. Refer to "Removal and Installation" LH & RH Front Anti-Pinch. After that, refer to "PASSENGER SIDE : Special Repair Requirement" Special Repair Requirement.
NO- Repair or replace harness or connectors.

3. CHECK FRONT POWER WINDOW MOTOR RH

Check front power window motor RH.
Refer to "PASSENGER SIDE : Component Inspection" LH & RH Front Anti-Pinch.
Is the inspection result normal?
YES- Check intermittent incident. Refer to "Intermittent Incident" Intermittent Incident.
NO- Replace front power window motor RH. Refer to "Removal and Installation Front Regulator" Removal And Installation. After that, refer to "PASSENGER SIDE : Special Repair Requirement" Special Repair Requirement.