Solenoids and Wiring Harness

TORQUE CONVERTER CLUTCH (TCC) SOLENOID 4T60-E






REMOVE OR DISCONNECT
1. Negative battery cable.
2. Case side cover. Refer to "Case Side Cover and Gaskets".
3. Clips retaining solenoid.
4. Solenoid harness connectors and solenoid.

INSTALL OR CONNECT
1. Solenoid harness connectors and solenoid.
2. Retaining clips.
3. Case side cover, new gaskets and attaching bolts.

TIGHTEN
^ Case side cover bolts to 9 to 13 Nm (80 to 115 lb. in.).

4. Negative battery cable.

ADJUST
^ Fluid level.