Brakes - Minimum Allowable Rotor Thickness
Bulletin No.: 04-05-23-002ADate: August 04, 2005
INFORMATION
Subject:
Brake Rotor Minimum Allowable Thickness After Refinish Specification Correction
Models:
2001-2004 Buick Century, Regal
2002-2004 Buick Rendezvous
1997-2004 Chevrolet Venture
2001-2004 Chevrolet Impala, Monte Carlo
1997-2004 Oldsmobile Silhouette
2001-2002 Oldsmobile Intrigue
1997-1998 Pontiac Trans Sport
1999-2004 Pontiac Montana
2001-2004 Pontiac Aztek, Grand Prix
Supercede:
This bulletin is being revised to add models and model years. Please discard Corporate Bulletin Number 04-05-23-002 (Section 05 - Brakes).
The current "Rotor Minimum Allowable Thickness After Refinish Specification" found in past Service Manual information is incorrect.
The correct Minimum Allowable Thickness After Refinish specification shown in the table should be used to determine the service life of the rotor.
This information has been updated within SI. If you are using a paper version of this Service Manual, please make a reference to this bulletin on the affected page.
Disclaimer