1ST Speed Only-No 1-2 Speed

1. Governor and governor feed passages.

a. Governor oil feed orifice in spacer plate clogged.

b. Governor ball or balls missing in governor assembly.

c. Inner governor cover O-ring leaking or missing.

d. Governor shaft seal damaged or missing.

e. Governor driven gear not engaged with governor shaft.

f. Governor driven gear stripped.

g. Governor weights binding.

2. Control valve assembly.

a. Spacer plate gaskets improperly installed.

b. 1-2 shift, Lo 1st/Detent or 1-2 throttle valve stuck in downshift position.

3. Case.

a. Porosity.

b. 2nd oil feed hole undrilled.

c. Leakage between case bore and intermediate band apply rings.

d. Intermediate band anchor pin missing or disconnected from band.

e. Broken or missing band.

4. 1-2 Accumulator.

a. Missing or damaged accumulator plate.

b. 1-2 accumulator housing bolts loose or face damage.