Reaction Gear Components

Make sure governor has already been removed.





1. Grasp output shaft and lift out reaction unit components, see image.

2. To remove roller clutch and reaction carrier assembly:





a. Remove roller clutch and reaction carrier assembly off output shaft, see image.





b. Remove the 4-tanged reaction carrier to reaction internal gear thrust washer off end of reaction carrier or inside inside reaction internal gear, see image.

3. Remove low and reverse clutch plates off output shaft

4. To remove reaction internal gear:

a. Remove reaction internal gear to reaction sun gear thrust bearing assembly off internal gear.





b. Remove reaction internal gear oft output shaft, see image.





5. Remove governor drive gear, see image.