Removal

Fig. 16 Removing poly-groove clutch coil:

Fig. 17 Removing poly-groove clutch coil (alternate method):

1. Remove clutch plate and hub assembly as described.
2. Remove pulley rotor and bearing assembly. Mark location of clutch coil terminals on compressor.
3. Install rotor and bearing puller guide J-25031-1 to front head and install puller J-8433-1 with puller leg set J-24092 to remove clutch coil from front head, Fig. 16. Coil may also be removed using same puller guide with puller J-25287, Fig. 17.