Removal

1. Drain radiator.

2. Remove air cleaner.

3. Disconnect upper radiator hose.

4. Disconnect thermostat by-pass at water pump hose.

5. Disconnect heater hose at rear of manifold.

6. Disconnect fuel and vacuum hoses.

7. Disconnect hose at A.I.R.

8. Remove throttle and T.V. cables.

9. Remove generator rear brace.

10. With AC, remove compressor rear brace.

11. Disconnect necessary electrical leads.

12. Disconnect CCC solenoid assembly and Idle Load Compensator and Bracket assembly.

13. Remove EGR valve.

14. Remove intake manifold bolts.

15. Clean intake manifold and cylinder block mating surfaces. Replace all gaskets.