Radio/Stereo: Service and Repair

1985---88
1. Disconnect battery ground cable.
2. Loosen instrument panel insulator panel attaching screws, then remove steering column trim cover.
3. Remove ash tray, ash tray assembly and fuse block, separate fuse block and ash tray and push forward to gain access to cigar lighter and rear defogger switch electrical connectors.
4. Disconnect electrical connectors, then remove cigar lighter and glove box.
5. Remove instrument panel center trim panel retaining nuts, then pull trim panel outward to gain access to radio attaching screws.
6. Remove attaching screws, disconnect electrical and antenna connections, then remove radio from vehicle.
7. Reverse procedure to install.