Locking Wire Wheel Covers - Component Inspection
87olds3SUBJECT N91 AND N95 - LOCKING WIRE WHEEL COVERS NUMBER: 87-I-22
DATE: June 26, 1987
MODELS/YEARS ALL 1987 MODELS SECTION: 9
The custom locking wire wheel cover package (Option N91/N95) is shipped in the trunk compartment.
At the time of delivery of a new vehicle by the carrier, the contents of the package containing Option N91/N95 are to be inspected for missing or incorrect parts. The contents of the package should include:
Four (4) Wire Wheel Covers With Lock Nuts One (1) Lock Key Wrench
Four (4) Lock Brackets One (1) I.D./Registration Card & Instructions
Four (4) Emblems Twelve (12) Flanged Lug Nuts (Installed on
Wheels)
NOTICE: 1987 Firenza, Calais, Cutlass Ciera, Delta 88, Ninety-Eight and Toronado models have only six (6) flanged lug nuts installed on rear wheels, and two (2) lock brackets placed in the trunk compartment.
Any discrepancies are to be noted on the delivery receipt and a transportation claim is to be filed for any missing or incorrect parts.
REPLACEMENT OF MISSING, INCORRECT OR LOST PARTS
Lock key wrenches and/or I.D./Registration Cards are available from Norris Industries and Wire Wheel Cover.
A. Lock key wrench missing upon delivery of vehicle from factory or lost at dealership after delivery:
Send I.D./Registration Card along with a check in the amount of $8.00 for the replacement lock key wrench to the applicable company.
B. I.D./Registration Card missing:
Provide the applicable company with the color and/or the letter stamped in the shaft on the lock key wrench. A new color coordinated I.D./Registration Card will be forwarded to the dealership.
C. Lock key wrench does not fit lock bolt or nut:
Send lock key wrench and I.D./Registration Card to the applicable company with a letter indicating the color of the lock bolt or nut in the center of the locking wire wheel cover. The proper lock key wrench and I.D./Registration Card will be returned to the dealership.
D. I.D./Registration Card and lock key wrench both missing:
Provide the color of the lock bolt or nut in the center of the wire wheel cover, along with a check in the amount of $8.00 made payable to the applicable company. The proper lock key wrench and I.D./Registration Card will be forwarded to your dealership by the applicable company (Norris Industries or Wire Wheel Cover).
Wire Wheel Cover - Locking wire wheel covers require a "T" shaped lock key wrench. Their wrench is plastic and is the same color as the lock bolt.
Norris Industries - Locking wire wheel covers require a "T" shaped lock key wrench. Their wrench will have a letter stamped on its cylinder portions to match the lock bolt letter or a plastic cap on the end to match the lock bolt color.
PARTS ORDERING
All requests must be made on dealership stationery to the applicable company:
Norris Industries, Inc. 1987 Firenza, Calais, Cutlass Ciera, Cutlass
Automotive Trim Division Supreme, Custom Cruiser and Delta 88 Models
39600 Orchard Hill Place Novi, MI 48050 or
Wire Wheel Cover 1987 Ninety-Eight and Toronado Models
P.O. Box 522 Grenada, MS 38901
Other missing or incorrect part(s) such as a locking wire wheel cover(s), lock bracket(s), medallion(s) and special lock nut(s) or bolt(s) are available through GMSPO.