Oil Filter: Service and Repair

This article has been updated with TSB 88-6-40.

OIL FILTER

When servicing 2.5L engines with the oil filter located in the oil pan, please be aware of the following recommended service procedure:

1. Remove oil pan drain plug and let oil drain completely.
2. Slowly turn filter to begin removal and pull downward.
3. Remove oil filter with pliers or vise-grips.
4. Check for presence of O-ring on used filter. If not on the filter, check inside the oil filter housing on the engine.
5. Coat O-ring and grommet inner bead on new filter with clean motor oil.
6. Press fit new filter (part number 25012305; A/C type PF1072) into housing by hand.
7. Wipe oil pan drain plug gasket with clean cloth and coat with clean motor oil.
8. Reinstall oil pan drain plug and tighten 1/4 turn after gasket contacts pan.
9. With engine oil at proper operating level, run engine and check plug for leaks. Check oil level.