Operation CHARM: Car repair manuals for everyone.
Home >> Oldsmobile >> 1988 >> Delta 88 V6-3800 3.8L >> Repair and Diagnosis >> Cruise Control >> Cruise Control Servo Cable >> Adjustments
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Cruise Control Servo Cable: Adjustments

FUEL INJECTED MODELS


1. Ensure cable assembly in cable and servo bracket.
2. Pull servo assembly cable and toward servo without moving throttle body lever.
3. If one of the holes in the servo tab aligns with cable pin, connect pin to tab with retainer.
4. If tab hole does not align with pin, move cable from servo assembly until next closest tab hole lines up, then connect pin to tab with retainer. Do not stretch cable to make adjustment, as the engine will not be able to return to idle.



CARBURETED MODELS

1. Ensure engine high idle speed is properly adjusted, turn off engine, then set carburetor choke to hot idle position.
2. Remove servo rod retainer, then adjust rod and install retainer in hole which provides some clearance between retainer and servo bushing. Clearance must not exceed width of one hole.

pro multis · About Operation CHARM