Sensor Replacement

Camshaft And Crankshaft Sensors:

Camshaft Sensor:

Camshaft Sensor Magnet:

REMOVE OR DISCONNECT
1. Battery ground cable.
2. Water pump pulley attaching bolts.
3. Serpentine belt.
4. Water pump pulley.
5. Sensor wiring connector.
6. Sensor retaining bolt.
7. Twist and pull sensor to remove.

INSTALL OR CONNECT
1. Lubricate O-ring on sensor.
2. Push and twist sensor to install.
3. Sensor retaining bolt.
4. Sensor wiring connector.
5. Water pump pulley.
6. Serpentine belt.
7. Water pump pulley attaching bolts.
8. Battery ground cable.