Instrument Cluster Replacement

Fig. 10 Removing Accessory Trim Plate:

Fig. 11 Removing Cluster Trim Plate:

Fig. 12 Removing Instrument Cluster:

1. Disconnect battery ground cable, then remove upper console, if equipped.
2. Remove accessory trim plate as follows:
a. Pry steering column collar rearward, using a suitable tool, and remove.
b. Remove outer air deflectors, then the two screws behind the deflector openings.
c. Remove screw from behind steering column collar.
d. On models less console, open ashtray and remove trim plate attaching screws.
e. On models with console, remove four screws from ashtray trim cover, then ashtray trim cover. Remove trim plate attaching screws.
f. On all models, pull trim plate rearward to release clips, then remove accessory trim plate, Fig. 10.
3. Remove screws attaching cluster trim plate, then trim plate, Fig. 11.
4. Remove steering column trim collar and trim plate.
5. Disconnect shift indicator clip from steering column shift bowl.
6. Remove cluster assembly attaching bolts, Fig. 12, then pull cluster rearward.
7. Disconnect speedometer cable from cluster.
8. Remove cluster assembly.
9. Reverse procedure to install.