Horn Relay: Service and Repair

Convenience Center

The convenience center is behind the right side of the instrument panel. It contains the hazard warning flasher, horn relay and warning system. To reach the convenience center, remove the right sound insulator and reach up behind the instrument panel. Remove the hazard flasher, horn relay or warning alarm by pulling straight out. (On the warning alarm, release the locking tab first.)






Removal

1. Remove the right sound insulator.
2. Remove two bolts (7 mm) holding center to bracket.
3. Disconnect wiring harness connectors.
4. Remove Convenience center.

Installation

1. Connect wiring harness connectors.
2. Install Convenience center.
3. Install two bolts.
4. Install right sound insulator.