Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously
Power Window
Regulator Tape:
Remove or Disconnect
1. Regulator.
2. Connect regulator motor to harness connector.
3. Tape from tabs on regulator.
4. Run tape out of regulator.
Install or Connect
1. Cut service tape to 705 mm (27 3/4").
2. Tape to regulator.
3. Slots on tape to tabs on regulator.
4. Regulator.