Campaign Identification Label and Parts Information

CAMPAIGN IDENTIFICATION LABEL

Each label provides space to print the campaign number, and the five (5) digit dealer code of the dealer performing the campaign. Insert this information with a typewriter or ball-point pen. When installing label, clean and dry the surface of the radiator support tie bar and apply the campaign label where it is readily visible.


PARTS INFORMATION

Although most vehicles involved in this campaign will NOT require any parts to complete this campaign,, a very small number of vehicles could experience a severely chafed and/or worn inlet hose. If a vehicle is found which requires a new inlet hose, order the appropriate replacement hose from GMSPO. Due to the limited number of inlet hoses available (and to assure availability of parts for vehicles which experience a severely chafed or worn inlet hose), do NOT order an inlet hose unless you have inspected and determined that a vehicle has a severely worn or chafed inlet hose.

To ensure parts are obtained as soon as possible, order them from GM Service Parts Operations (GMSPO) on a C.I.O. order, with NO special instruction code, but order on an advise code (2). Use the following part numbers:


Description Part Number Quantity Per Vehicle

VIv - Heater Water Flow Control/With Hose & Brkts 10165021 1, as required