Drive Range - Third Gear (TCC Applied)

In this range, the forward and direct clutches are applied and the intermediate band is released. The transaxle is in drive range-third gear (direct drive).

When vehicle speed reaches converter clutch engagement speed, the CA or governor pressure switch will activate the solenoid, closing the exhaust valve. This allows solenoid circuit oil to move the converter clutch control valve against line pressure. With the converter clutch control valve in the apply position, regulated line oil from the converter clutch regulator valve is allowed to pass into the converter apply passage. It then flows through the turbine shaft to the apply side of the converter clutch. The regulated line oil from the converter clutch regulator valve controls the apply of the pressure plate.