Coupe

Door Lock Module:

Door locks use the fork bolt lock design which includes a safety interlock feature. The door is secured in a closed position when the door lock fork bolt engages the striker bolt. The doors can be locked from the inside by sliding the lock knob rearward. All doors can be locked from the outside by sliding the lock knob rearward and closing the door. The doors can also be locked by using the key.

Do not attempt repairs to correct lock discrepancies. Make corrections through replacement of lock assembly.

Remove or Disconnect

1. Lock module.
2. All rods attached to lock.
3. Lock from lock module by bending three tabs outward.
4. Electrical connector from module to door passive safety belt switch.
5. Lock.

Install or Connect

1. Electrical connector to passive safety belt switch from module.
2. Lock to lock module by bending three tabs inward.
3. All rods disconnected in step 2 of removal procedure.
4. Lock module.