Troubleshooting Hints - Lamp Monitor

1. Check I/P Fuse Block Fuse 11 by operating the Radio.
2. Check I/P Fuse Block Fuse 20 by visual inspection.
3. If the Driver Information Center (DIC) displays a bulb outage when all bulbs are OK, check that all bulbs sharing the same circuit are the correct type and that connections in the bulb circuit are clean and tight. If all are OK, replace the Adaptive Lamp Monitor Module.
4. If a single bulb outage is not displayed by the Driver Information Center (DIC), check that the open bulb and bulbs in parallel with open bulb are the correct type. Check for a short in the wiring and if a trailer harness is used.