Power Seat Adjuster Switch - Replacement

NUMBER: 93-U-13

CORP.REF.NO.: 231070

DATE: December 1992

SECTION: 10-10

SUBJECT:
POWER SEAT ADJUSTER SWITCH REMOVE AND REPLACE

MODELS/YEARS:
1990-93 SILHOUETTE

The service procedure contained in this bulletin was omitted from Silhouette Service Manuals for the 1990-93 model years.

POWER SEAT ADJUSTER SWITCH REMOVE AND REPLACE:

Remove or Disconnect

1. Raise driver seat to maximum height and position seat fully rearward.
2. Rear bolts (2) retaining seat cushion frame to seat riser.
3. Position driver seat fully forward.
4. Front bolts (2) retaining seat cushion frame to seat riser.
5. Driver seat from seat riser.
6. Electrical connector from power seat adjuster switch.
7. Power seat adjuster switch from inboard driver seat adjuster cover.

Install or Connect

1. Power seat adjuster switch to inboard driver seat adjuster cover.
2. Electrical connector to power seat adjuster switch.
3. Driver seat onto seat riser.
4. Front bolts (2) retaining seat cushion frame to seat riser. Tighten bolts to 28 N-m (20 lb.ft.).
5. Position driver seat fully rearward.
6. Rear bolts (2) retaining seat cushion frame to seat riser. Tighten bolts to 28 N-m (20 lb.ft.).