Assemble

1. Apply Transjel part No. J36850 or equivalent to inside of planet pinion (816).

2. Install needle bearing spacer onto planet pinion.




3. Assemble pinion needle bearing spacer between two rows.

4. On transaxles with a final drive ratio of 3.06 or 3.33, install 44 needle bearings per pinion (22 per row).

5. On transaxles with a final drive ratio of 2.84, install 36 needle bearings per pinion (18 per row).

6. Install sun gear/carrier thrust bearing.

7. Install pinion thrust washers (806/807) and planet pinion into carrier.

8. Install planet pinion pin (804), then the final drive carrier snap ring (677).