Test P: Keyboard Input Test

Test R:

Test R Cont.:

Note: If DIC On-Board Diagnostics cannot be entered, see Table.

Enter DIC On-Board Diagnostics (see DIC ON-BOARD DIAGNOSTICS). Observe the DIC display position "H" and press each of the DIC Switch Assembly buttons 0 through 9, ENTER/OFF and RESET. The DIC display position "H" should show the number corresponding to each button, "E" for ENTER/OFF and "R" for RESET.
^ If the display is correct, replace the Instrument Cluster.
^ If the display is not correct, see Table.