Test E: Oil Pressure Indicator Is Always Lit

1. Check oil level and pressure with a mechanical gage.
^ If oil level and pressure are OK, go to step 2.
^ If oil level and pressure are not OK, see CEC section.
2. With Ignition Switch in RUN, disconnect the Oil Pressure Switch connector.
^ If the OIL Pressure Indicator is now out, replace the Oil Pressure Switch.
^ If the OIL Pressure Indicator is still lit, check the TAN (31) wire and the Multi-Function Chime Module for a short to ground. If wire is OK, replace the Instrument Cluster.