Troubleshooting Hints - Power Windows

1. Always check terminal contact before replacing any component.
2. If Express Down function does not operate, but window operates, check for battery voltage at terminal A of Express Down Window Module connector and DK BLU (164) wire from terminal C of Express Down Window Module to splice S500 for an open. If both checks are OK, replace Express Down Window Module.
3. If a motor's internal circuit breaker trips, it will not reset until voltage is removed from the motor.
4. If Power Windows do not operate for approximately 10 minutes (or until a door is opened) after Ignition Switch is turned to OFF, see RETAINED ACCESSORY POWER for diagnosis.