Without A/C

REMOVE OR DISCONNECT

1. Heater control assembly. Refer to "Control Assembly and Blower Switch."

^ Pull the heater control assembly out far enough to reach the control assembly lamp bulb socket.

2. Lamp bulb and socket.

3. Lamp bulb from socket.

^ Pull the lamp bulb straight out from the socket.


Inspect


^ Control assembly lamp bulb socket for corrosion and damage. Clean or replace as necessary.

^ Wires for damage and secure connection to the lamp bulb socket. Repair or replace as necessary.


INSTALL OR CONNECT


1. New lamp bulb.

^ Push the lamp bulb straight into the socket.

2. Lamp bulb and socket.

3. Heater control assembly. Refer to "Control Assembly and Blower Switch."

^ Check circuit operation.