Test B

1. Check instrument cluster fuse.
2. Ensure terminal J of cruise control module connector is grounded.
3. Disconnect connector C202 and check for battery voltage at terminal E12 (pink/black wire) of female half with ignition switch in Run position. If battery voltage is not available, check pink/black wire (circuit 750).
4. Check continuity between terminals E1 (gray wire) and E12 (pink/black wire) of male half of connector C202 with cruise switch in On position. If there is no continuity, replace multi-function lever.
5. Check for open in gray/white wire (circuit 397) between terminal E1 of connector C202 and terminal A of cruise control module connector.