Weather Pack Connectors

WEATHER PACK

Fig. 21 Typical Weather Pack Connector and Terminal:

Follow the steps below to repair Weather Pack(R) connectors, Fig. 21.

Step 1: Separate the connector halves.

Step 2: Open secondary lock. A secondary lock aids in terminal retention and is usually molded to the connector.

Step 3: Grasp the lead and push the terminal to the forward most position. Hold the lead at this position.

Step 4: Insert the Weather Pack(R) terminal removal tool into the front (mating end) of the connector cavity until it rests on the cavity shoulder.

Step 5: Gently pull on the lead to remove the terminal through the back of the connector.

NOTICE: Never use force to remove a terminal from a connector.

Step 6: Inspect the terminal and connector for damage. Repair as necessary, see TERMINAL REPAIR.

Step 7: Reform the lock tang and reseat terminal in connector body.

Step 8: Close secondary locks and join connector halves.