Keyless Entry Transmitter: Service and Repair

Transmitter Programming

1. Connect Tech 1 to Data Link Connector using 16 pin adaptor.
2. Access Reprogram Key Tag(s) through F4: RAC Tests menu on the Tech 1.
3. Follow directives given by Tech 1.

^ The door locks will lock and unlock when transmitter buttons are pressed and when YES is pressed when answering Tech 1, this is normal.
^ The Tech 1 will abort the RAC programming procedure if the 55 second time limit is exceeded. If this occurs re-access Reprogram Key Tag(s) and start again.