Troubleshooting Hints

1. Check that ground G302 is clean and tight.
2. Check the R/CMPT Fuse by visual inspection.
^ Check for a broken (or Partially broken) wire inside of the insulation which could cause system malfunction but prove "GOOD" in a continuity/voltage check with system disconnected. These circuits may be intermittent or resistive when loaded and if possible, should be checked by monitoring for a voltage drop with the system operational (under load).
^ Check for proper installation of aftermarket electronic equipment which may affect the integrity of other systems (refer to General Troubleshooting Procedures. Diagnostic Aids
^ Refer to System Diagnosis. System Diagnosis