Coupe

Headlamp Assembly:

Remove or Disconnect

1. Open hood.
2. Headlamp bezel retainers and bezel.
3. Spring from bottom edge of headlamp assembly.
4. Assembly.
^ Do not apply pressure to plastic bubble of vertical aim indicator.
5. Electrical connector from assembly.
6. Two screws from headlamp retaining ring.
7. Rotate headlamp retaining ring away from headlamp.
8. Headlamp.

Install or Connect

1. Headlamp.
2. Two screws to headlamp retaining ring.

Tighten
^ Screws to 2 N.m (18 lb. in.).

3. Electrical connector to assembly.
4. Assembly.
5. Spring to bottom of headlamp assembly.
6. Headlamp bezel and retainers.
7. Close hood.

Inspect
^ Vertical aim indicator bubble for correct headlamp aim.